User:Zhagling123567

Bulk Multilayer PCB Product introduction: 2 layer pcb 2 layer pcb Ink: matte black oilPlate thickness: 1.5MM Copper thickness: 1OZProcess: tin deposition Minimum aperture: 0.5MMF-T test: 100% 聽 2銆?Appearance of black oil plate: Black oil 2 layer pcb film printing causes: ink dry, over pressure pumping, film easy to stick ink. 1. Prebake for 40 minutes on one side is enough. Please check the actual temperature and exhaust effect of oven. The temperature should be about 75 degrees C, and the draught should be about 4 cubic meters/minute. After the ink is pre-baked, cool it to the ambient temperature. Pinch it with your fingers until it doesn't stick. 2. When setting the aerator, the suction pressure should not be too large, and the pressure should be reduced in the area of large copper surface and large substrate. 3. Keep the film clean. If there is ink residue, remove it immediately. Otherwise, it will become more sticky. In addition, non-stick ink can be replaced to reduce the film printing. 聽 3銆丳roduct features: The black oil circuit board products produced by our company are particularly favored by customers. I remember that one of our customers saw the quality of the samples we showed at the Hong Kong exhibition in 2017 and thought it was very good. He asked if we could make black oil board and our sales manager replied him that of course, black oil board is our strength. Many panels and LED screens are made of black oil technology. The color and thickness of the ink we make can meet 100% the needs of international customers. See the picture: After the cooperation of 2-layer pcb with black oil, the customers were very satisfied with it, and some orders of 4-layer board and 6-layer board were added. In 2018, several managers of the customer company visited our factory of the company, and in-depth cooperation has been conducted until now. 聽 4.Company introduction: At present, the plant of JiangXi Bente occupies an actual area of 10,000 square meters, and the production capacity of 40,000 square meters per month, mainly with high precision 2-6-layer plates. The company has obtained ISO9001:2008 quality management system certification, ISO14001:2004 Environmental management system certification, SGS certification, American and European UL certification (UL E492586), TS16949 and so on. 聽 5. Company culture: Company to "people-oriented, customer first; Is keeping the way, integrity and win-win "for the business philosophy; "Based on fine products and good character, to create the best products and services" corporate values, to "pursue customer satisfaction; Achieve employee happiness; The lofty mission of making contributions to the society has been highly recognized by many customers and supported by our partners. We will, as always, in order to achieve "go forward, characteristics lead; Become the characteristics of the circuit board industry leader "noble vision to go all out, determined to cast China's most focused, the most professional precision circuit board intelligent manufacturers. 聽 Bente Mission: Pursue customer satisfaction锛?/p> Achieve employee happiness锛孋ontribute to social development. 聽Bulk Multilayer PCB website:http://www.bentepcb.com/multilayer-pcb/http://www.bentepcb.com/multilayer-pcb/